2006-11-09  Kevin P. Fleming <kpfleming@digium.com>

	* Zaptel 1.2.11 released
	
2006-11-08 23:04 +0000 [r1573]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp/base.c, wcte11xp.c, wct4xxp/vpm450m.h, wct4xxp,
	  wct4xxp/vpm450m.c: clean up recent VPMOCT changes add support for
	  Infineon FALC rev 2.2

2006-11-06 20:09 +0000 [r1559]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/utils/genzaptelconf.8, xpp/utils/genzaptelconf: *
	  genzaptelconf: Set modes of generated files to original ones or
	  sane defaults. * genzaptelconf: Don't check for zap_autoreg in
	  wait_for_xpp . * genzaptelconf: Add support for fxs_immediate:
	  option to set FXS port as immediate. * genzaptelconf: Fix few
	  left over writes to stdout for config files. * genzaptelconf:
	  Documentation fixes. * genzaptelconf.8: bring up-to-date.

2006-11-05 06:44 +0000 [r1556]  Matt Frederickson <creslin@digium.com>

	* wct4xxp/Kbuild, wct4xxp/base.c, wct4xxp/Makefile,
	  wct4xxp/vpm450m.h, wct4xxp/OCT6114-64D.ima (added),
	  wct4xxp/vpm450m.c: Add support for VPMOCT64 module

2006-10-31 06:25 +0000 [r1542]  Russell Bryant <russell@digium.com>

	* Makefile: fix the installation of wct4xxp for 2.4 kernels (issue
	  #7964, fixed by gkloepfer, but the committed fix is slightly
	  modified)

2006-10-26 00:00 +0000 [r1534-1535]  Kevin P. Fleming <kpfleming@digium.com>

	* wctdm24xxp.c: do ProSLIC 3215 check properly in this driver too

	* wctdm.c: do ProSLIC 3215 check properly

2006-10-24 01:08 +0000 [r1527]  Russell Bryant <russell@digium.com>

	* doc/ztmonitor.8, doc/zttool.8, doc/ztcfg.8: convert some
	  characters of ISO8859-1 encoding to be UTF-8 (issue #8200,
	  jcollie)

2006-10-20 01:23 +0000 [r1519]  Joshua Colp <jcolp@digium.com>

	* torisa.c, zaptel.h, zconfig.h: Later distros have now taken to
	  removing this file as it has been deprecated for awhile now... so
	  on kernels 2.6.18 or higher we can safely not include it. (props
	  to jsmith)

2006-10-18 02:14 +0000 [r1517]  Russell Bryant <russell@digium.com>

	* Makefile: remove ROOT_PREFIX, and move INSTALL_PREFIX to before
	  the first time it is used (issue #7913, darren1713)

2006-10-17  Kevin P. Fleming <kpfleming@digium.com>

	* Zaptel 1.2.10 released
	
2006-10-11 17:22 +0000 [r1499]  Joshua Colp <jcolp@digium.com>

	* Makefile: Copy to both directories, not just the first one.

2006-10-03 04:50 +0000 [r1493-1496]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/README.Astribank: Updated README.Astribank to reflect current
	  hardware.

	* xpp/utils/genzaptelconf: * run config function (genconf) in a
	  single pass. Bumped version to 0.5.6 . * E1 spans should not be
	  configured as "national". TODO: find a better default * Add
	  support for Sangoma A102 (Hopefully also all A10x) PRI cards: -d
	  won't work, but will configure existing spans. * Better comments
	  in genconf() * Removing update_extensions_defs: cleaning
	  temporary files is only done once.

	* xpp/utils/genzaptelconf: * fixed a small syntax error * Hopefully
	  correct PRI setting for country=cl

	* xpp/utils/genzaptelconf: Allow overriding the location of the
	  asterisk init.d script using the variable ASTERISK_INIT_SCRIPT
	  (from the config file or from the environment).

2006-09-16 07:45 +0000 [r1468]  Tilghman Lesher <tilghman@mail.jeffandtilghman.com>

	* zaptel.c: Round two of the fix for "hard-safe -> hard-unsafe lock
	  order detected" (Issue 7620) Only difference is that the fix is
	  only defined for kernel versions 2.6.11 and above; older kernels
	  keep the current (possible deadlocking) code.

2006-09-11  Kevin P. Fleming <kpfleming@digium.com>

	* Zaptel 1.2.9.1 released
	
2006-09-09 19:29 +0000 [r1458]  Joshua Colp <jcolp@digium.com>

	* wct4xxp/fw2h.c: Update firmware header generation tool to support
	  paths being supplied with the filename (reported internally by
	  Spiceland)

2006-09-09 15:24 +0000 [r1457]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/utils/print_modes.c (added), xpp/card_fxo.c, xpp/xpp_zap.h,
	  xpp/card_fxs.c, xpp/card_fxo.h, xpp/xproto.c, xpp/Makefile,
	  xpp/utils/Makefile, xpp/card_fxs.h, xpp/utils/FPGA_FXS.hex,
	  xpp/xproto.h, xpp/xpd.h, xpp/init_data_3_20.cmd,
	  xpp/init_data_4_20.cmd, xpp/calibrate_slics (added),
	  xpp/initialize_registers, xpp/xbus-core.c,
	  xpp/init_data_3_19.cmd, xpp/init_data_4_19.cmd,
	  xpp/utils/xpp_fxloader, xpp/utils/fpga_load.c,
	  xpp/utils/USB_8613.hex, xpp/xbus-core.h, xpp/utils/genzaptelconf,
	  xpp/xdefs.h, xpp/utils, xpp, xpp/xpp_usb.c, xpp/xpp_zap.c: Latest
	  xpp driver. Backported from trunk (r1455, Xorcom r2157)

2006-09-08  Kevin P. Fleming <kpfleming@digium.com>

	* Zaptel 1.2.9 released
	
2006-09-08 23:49 +0000 [r1444]  Joshua Colp <jcolp@digium.com>

	* wct4xxp/base.c, Makefile: Move CONFIG_FW_LOADER check to Makefile
	  (reported internally by Spiceland)

2006-09-08 16:11 +0000 [r1436-1438]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp/base.c, wct4xxp/vpm450m.c: fix problem with
	  VPM450M/VPMOCT when T1 and E1 are both used on the card make
	  hardware DTMF detection default based on whether the module is a
	  VPM400M or a VPM450M/VPMOCT

2006-09-08 03:17 +0000 [r1431]  Joshua Colp <jcolp@digium.com>

	* pciradio.c: Include moduleparam.h like every other module for
	  certain 2.6 kernels (issue #7884 reported by iceberg13de)

2006-09-05 16:37 +0000 [r1400]  Matt Frederickson <creslin@digium.com>

	* Makefile: Forgot to add part of clean target to 1.2

2006-08-27 22:58 +0000 [r1368]  Joshua Colp <jcolp@digium.com>

	* Makefile: Copy the firmware from the new location

2006-08-27 02:27 +0000 [r1359-1363]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp/base.c, Makefile, wct4xxp/vpm450m.h, wct4xxp (added),
	  OCT6114-128D.ima (removed), octapi_llman_private.h (removed),
	  include (removed), wct4xxp/wct4xxp-diag.c, fw2h.c (removed),
	  wct4xxp/wct4xxp.h, vpm450m.c (removed), wct4xxp/Kbuild,
	  wct4xxp_base.c (removed), wcte11xp.c, vpm450m.h (removed),
	  wct4xxp/Makefile, octvpm.h (removed), /,
	  wct4xxp/OCT6114-128D.ima, octapi_bt0_private.h (removed),
	  wct4xxp-diag.c (removed), wct4xxp.h (removed), wct4xxp/fw2h.c,
	  wct4xxp/vpm450m.c: merge in new, cleaner Octasic API integration

2006-08-22  Kevin P. Fleming <kpfleming@digium.com>

	* Zaptel 1.2.8 released
	
2006-08-19 02:27 +0000 [r1327]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp_base.c: don't report the VPM servicing more spans than
	  the card actually has

2006-08-18 20:20 +0000 [r1326]  Matt Frederickson <creslin@digium.com>

	* Makefile: Add b410p support into 1.2 Makefile.

2006-08-16 01:36 +0000 [r1317]  Tilghman Lesher <tilghman@mail.jeffandtilghman.com>

	* zaptel.init: Bug 7624 - Debian lacks /var/lock/subsys

2006-08-15 22:06 +0000 [r1311-1315]  Russell Bryant <russell@digium.com>

	* fxotune.c: Ensure that fopen() is only called once for the debug
	  output file to prevent excessive file descriptor leakage when
	  this function is called many times in a loop. (issue #7203)

	* Makefile: fix erroneous check to see if PWD was set before
	  setting it in the Zaptel Makefile. It should always be set. If
	  not, it breaks the build when using recursive calls to make.
	  (issue #7733, tzafrir)

	* zaptel.c: fix passing a 'w' to wait when using pulse dialing
	  (issue #7738, hanabana)

2006-08-14 20:40 +0000 [r1306]  Kevin P. Fleming <kpfleming@digium.com>

	* zaptel.c: revert this change until a version that compiles on 2.4
	  kernels and older 2.6 kernels is made available and tested

2006-08-14 04:07 +0000 [r1298-1304]  Russell Bryant <russell@digium.com>

	* zaptel.c: fix potential deadlock found by kernel's lock checker
	  (issue #7620, reported by smurfix, fixed by Corydon)

	* wct4xxp_base.c: add a note that ENABLE_TASKLETS is not
	  implemented in wct4xxp (issue #7688)

	* Makefile: the change from $(PWD) to $(SUBDIRS) breaks the build
	  on some systems. So, just use them both ... (issue #7720)

2006-08-08 22:22 +0000 [r1262]  Kevin P. Fleming <kpfleming@digium.com>

	* include/apilib/octapi_llman.h,
	  include/oct6100api/oct6100_events_inst.h,
	  include/oct6100api/oct6100_chip_open_inst.h,
	  include/oct6100api/oct6100_tlv_inst.h,
	  include/oct6100api/oct6100_phasing_tsst_inst.h,
	  include/octtypewin.h, include/oct6100api/oct6100_channel_inst.h,
	  include/oct6100api/oct6100_chip_stats_pub.h,
	  include/octosdependant.h,
	  include/oct6100api/oct6100_tone_detection_pub.h,
	  include/octrpc/oct6100_rpc_protocol.h,
	  include/oct6100api/oct6100_events_pub.h,
	  include/oct6100api/oct6100_adpcm_chan_inst.h,
	  include/oct6100api/oct6100_chip_open_pub.h,
	  include/oct6100api/oct6100_phasing_tsst_pub.h,
	  include/oct6100api/oct6100_errors.h,
	  include/oct6100api/oct6100_channel_pub.h,
	  include/apilib/octapi_bt0.h,
	  include/oct6100api/oct6100_debug_inst.h,
	  include/oct6100api/oct6100_interrupts_pub.h,
	  include/oct6100api/oct6100_playout_buf_inst.h,
	  include/oct6100api/oct6100_debug_pub.h,
	  include/octrpc/rpc_protocol.h,
	  include/oct6100api/oct6100_chip_stats_inst.h,
	  include/oct6100api/oct6100_apimi.h,
	  include/oct6100api/oct6100_tone_detection_inst.h,
	  include/oct6100api/oct6100_apiud.h, include/octdef.h,
	  include/oct6100api/oct6100_tsi_cnct_inst.h, include/octtypevx.h,
	  include/octmac.h, include/oct6100api/oct6100_api_inst.h,
	  include/oct6100api/oct6100_remote_debug_pub.h,
	  include/oct6100api/oct6100_conf_bridge_pub.h,
	  include/oct6100api/oct6100_api.h,
	  include/oct6100api/oct6100_tsi_cnct_pub.h,
	  include/oct6100api/oct6100_interrupts_inst.h,
	  include/oct6100api/oct6100_defines.h, vpm450m.c,
	  include/oct6100api/oct6100_mixer_inst.h,
	  include/oct6100api/oct6100_adpcm_chan_pub.h, include/octtype.h,
	  include/oct6100api/oct6100_mixer_pub.h,
	  include/oct6100api/oct6100_tsst_inst.h,
	  include/apilib/octapi_largmath.h,
	  include/oct6100api/oct6100_remote_debug_inst.h,
	  include/oct6100api/oct6100_conf_bridge_inst.h,
	  include/oct6100api/oct6100_playout_buf_pub.h: update Octasic API
	  headers (but not code yet) to PR43, and use version with GPL
	  licenses instead of proprietary licenses

2006-08-05 05:53 +0000 [r1259]  Russell Bryant <russell@digium.com>

	* Makefile: Fix the zaptel build on SuSE 10.1 (issue #7536, hk)

2006-07-27 15:06 +0000 [r1248]  Joshua Colp <jcolp@digium.com>

	* Makefile: Use INSTALL_PREFIX when installing firmware (issue
	  #7600 reported by jcollie)

2006-07-19 13:50 +0000 [r1243]  Joshua Colp <jcolp@digium.com>

	* wct4xxp_base.c, Makefile: Only use hotplug firmware loading if
	  the kernel has support for it

2006-07-16 00:16 +0000 [r1236]  Joshua Colp <jcolp@digium.com>

	* Makefile: Minor Makefile adjustment for installing the firmware

2006-07-16 00:12 +0000 [r1235]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp_base.c: eliminate compiler warning

2006-07-15 20:26 +0000 [r1233]  Joshua Colp <jcolp@digium.com>

	* wct4xxp_base.c, Makefile, vpm450m.h, vpm450m.c: Add support for
	  loading the VPM450M firmware using hotplug from userspace.

2006-07-14 20:19 +0000 [r1230]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/card_fxo.c, xpp/xbus-core.c, xpp/card_fxs.c, xpp/xpp_usb.c,
	  xpp/xpp_zap.c: NULLify pointers to /proc files after removing
	  them (so anyone who tries to access them afterwards causes Oops
	  instead of unknown behaviour).

2006-07-14  Kevin P. Fleming <kpfleming@digium.com>

	* Zaptel 1.2.7 released
	
2006-07-14 20:19 +0000 [r1226-1230]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/card_fxo.c, xpp/xbus-core.c, xpp/card_fxs.c, xpp/xpp_usb.c,
	  xpp/xpp_zap.c: NULLify pointers to /proc files after removing
	  them (so anyone who tries to access them afterwards causes Oops
	  instead of unknown behaviour).

	* xpp/utils/genzaptelconf: genzaptelconf: Fix version strings

	* xpp/utils/genzaptelconf: genzaptelconf: fixed confusion between
	  framing and coding for E1/{il/nl}

	* xpp/utils/genzaptelconf: genzaptelconf: use
	  /proc/xpp/XBUS-*/wait_for_xpds rather than a timeout loop

	* xpp/card_fxs.c, xpp/init_data_3_20.cmd: FXS current fixes (init
	  parameters and on runtime)

2006-07-08 00:43 +0000 [r1212]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/utils/hexfile.c (added), xpp/xpp_fxloader.usermap (removed),
	  xpp/utils/xpp_fxloader.usermap (added), xpp/xpp_zap.h,
	  xpp/utils/hexfile.h (added), xpp/xpp_proto.c (removed),
	  xpp/FPGA_XPD.hex (removed), xpp/slic.c, xpp/xproto.c,
	  xpp/xpp_proto.h (removed), xpp/slic.h, xpp/utils/FPGA_FXS.hex
	  (added), xpp/utils/USB_1130.hex (added), xpp/xproto.h, xpp/xpd.h,
	  xpp/init_data_3_20.cmd (added), xpp/sync.sh (removed),
	  xpp/xbus-core.c (added), xpp/utils/test_parse.c (added),
	  xpp/init_data_4_19.cmd (added), xpp/utils/xpp_fxloader (added),
	  xpp/xpp_fxloader (removed), xpp/xbus-core.h (added),
	  xpp/utils/fpga_load.c (added), xpp/xdefs.h, xpp/utils (added),
	  xpp/utils/genzaptelconf.8 (added), xpp/gen_slic_init (removed),
	  xpp/card_fxo.c (added), xpp/card_global.c, xpp/card_fxs.c,
	  xpp/README.Astribank, xpp/card_fxo.h (added), xpp/Makefile,
	  xpp/cards.c (removed), xpp/utils/Makefile (added),
	  xpp/card_fxs.h, xpp/card_global.h, xpp/zap_debug.c, xpp/cards.h
	  (removed), xpp/init_data_4_20.cmd (added), xpp/utils/fpga_load.8
	  (added), xpp/slic_init.inc (removed), xpp/zap_debug.h,
	  xpp/initialize_registers (added), xpp/init_data_3_19.cmd (added),
	  xpp/LICENSE.firmware (added), xpp/utils/USB_8613.hex (added),
	  xpp/xpp_modprobe (removed), xpp/utils/xpp_modprobe (added),
	  xpp/utils/genzaptelconf (added), xpp/xpp_usb.c, xpp/xpp_zap.c:
	  xpp Release 1.1.0 : * FPGA firmware now loaded from PC (for newer
	  models) * Driver for the FXO module (xpd_fxo.ko) * Moved most
	  userspace files to the subdirectory utils (see also next commit)
	  * Explicit license for firmware files * Optionally avoid
	  auto-registration * Registers initializations code is done by a
	  userspace script. * Remove obsolete .inc initialization files (we
	  use user-space init) * Added an install target to the utils dir.
	  * Updated README.Astribank accordingly. * Using RBS signalling,
	  as caller ID did not work well otherwise. * Better handling of
	  USB protocol errors. * Fixed some procfs-related races. *
	  per-card-module ioctls. * fxotune support. * opermode support
	  (set through /etc/default/zaptel for now) * Userspace
	  initialization script can also read registers. * Power
	  calibration works (and implemented in perl) * some fine-tuning to
	  the regster initialization parameters. * Leds turn on before
	  registration and turn off after it.

2006-07-07 18:03 +0000 [r1206]  Russell Bryant <russell@digium.com>

	* include/oct6100api/oct6100_chip_open_inst.h (added),
	  include/oct6100api/oct6100_chip_stats_priv.h (added),
	  include/oct6100api/oct6100_events_inst.h (added),
	  include/oct6100api/oct6100_tone_detection_priv.h (added),
	  include/oct6100api/oct6100_phasing_tsst_inst.h (added),
	  include/octtypewin.h (added),
	  include/oct6100api/oct6100_channel_inst.h (added),
	  include/octosdependant.h (added),
	  include/oct6100api/oct6100_tone_detection_pub.h (added),
	  include/oct6100api/oct6100_events_pub.h (added),
	  include/oct6100api/oct6100_adpcm_chan_inst.h (added),
	  include/oct6100api/oct6100_chip_open_pub.h (added), fw2h.c
	  (added), include/oct6100api/oct6100_errors.h (added),
	  include/oct6100api/oct6100_channel_pub.h (added),
	  include/oct6100api/oct6100_interrupts_priv.h (added),
	  include/oct6100api/oct6100_debug_inst.h (added),
	  include/oct6100api/oct6100_mixer_priv.h (added),
	  include/oct6100api/oct6100_interrupts_pub.h (added),
	  include/oct6100api/oct6100_playout_buf_inst.h (added), wct4xxp.c
	  (removed), include/octrpc/rpc_protocol.h (added),
	  include/oct6100api/oct6100_tsst_priv.h (added),
	  include/oct6100api/oct6100_apimi.h (added),
	  include/oct6100api/oct6100_conf_bridge_priv.h (added),
	  include/octdef.h (added),
	  include/oct6100api/oct6100_tsi_cnct_inst.h (added),
	  include/octtypevx.h (added),
	  include/oct6100api/oct6100_chip_open_priv.h (added),
	  include/oct6100api/oct6100_events_priv.h (added),
	  include/oct6100api/oct6100_phasing_tsst_priv.h (added),
	  include/oct6100api/oct6100_remote_debug_pub.h (added),
	  include/oct6100api/oct6100_channel_priv.h (added),
	  include/oct6100api/oct6100_memory_priv.h (added),
	  include/oct6100api/oct6100_adpcm_chan_priv.h (added),
	  wct4xxp_base.c (added), include/octtype.h (added),
	  include/oct6100api/oct6100_debug_priv.h (added),
	  octapi_bt0_private.h (added),
	  include/oct6100api/oct6100_playout_buf_priv.h (added),
	  include/oct6100api/oct6100_remote_debug_inst.h (added),
	  include/apilib/octapi_llman.h (added),
	  include/oct6100api/oct6100_tlv_inst.h (added), include/octrpc
	  (added), include/oct6100api/oct6100_tsi_cnct_priv.h (added),
	  include/oct6100api/oct6100_chip_stats_pub.h (added),
	  include/octrpc/oct6100_rpc_protocol.h (added),
	  include/oct6100api/oct6100_phasing_tsst_pub.h (added),
	  include/apilib/octapi_bt0.h (added), octvpm.h (added),
	  include/oct6100api/oct6100_version.h (added),
	  include/oct6100api/oct6100_debug_pub.h (added),
	  include/oct6100api (added),
	  include/oct6100api/oct6100_chip_stats_inst.h (added),
	  include/oct6100api/oct6100_tone_detection_inst.h (added),
	  include/oct6100api/oct6100_remote_debug_priv.h (added), Makefile,
	  include/oct6100api/oct6100_apiud.h (added),
	  include/oct6100api/oct6100_miscellaneous_priv.h (added),
	  include/octmac.h (added), include/oct6100api/oct6100_tlv_priv.h
	  (added), include/oct6100api/oct6100_api_inst.h (added),
	  include/oct6100api/oct6100_conf_bridge_pub.h (added),
	  OCT6114-128D.ima (added), octapi_llman_private.h (added),
	  include/apilib (added), include (added),
	  include/oct6100api/oct6100_api.h (added),
	  include/oct6100api/oct6100_tsi_cnct_pub.h (added),
	  include/oct6100api/oct6100_interrupts_inst.h (added),
	  include/oct6100api/oct6100_defines.h (added), vpm450m.c (added),
	  include/oct6100api/oct6100_mixer_inst.h (added), vpm450m.h
	  (added), include/oct6100api/oct6100_adpcm_chan_pub.h (added),
	  include/oct6100api/oct6100_mixer_pub.h (added),
	  include/oct6100api/oct6100_tsst_inst.h (added),
	  include/apilib/octapi_largmath.h (added),
	  include/oct6100api/oct6100_conf_bridge_inst.h (added),
	  include/oct6100api/oct6100_playout_buf_pub.h (added): merge
	  vpm450m support

2006-07-07 18:02 +0000 [r1205]  Joshua Colp <jcolp@digium.com>

	* wctdm.c: Add missing TDM400 PCI definition (issue #7502 reported
	  by chozian)

2006-06-28 19:13 +0000 [r1185-1187]  Joshua Colp <jcolp@digium.com>

	* zaptel.sysconfig: Add Xorcom Astribank per tzafrir's request

	* zaptel.sysconfig: Add the TDM2400P to the sysconfig file (issue
	  #7441 reported by mrobinson)

2006-06-21 19:27 +0000 [r1151]  Joshua Colp <jcolp@digium.com>

	* zonedata.c: Add Venezuelan tone information (issue #7402 reported
	  by palillo)

2006-05-31 19:42 +0000 [r1101]  Kevin P. Fleming <kpfleming@digium.com>

	* wctdm24xxp.c: minor typo in error message

2006-05-31 03:59 +0000 [r1097]  Tilghman Lesher <tilghman@mail.jeffandtilghman.com>

	* tor2-hw.h: Bug 7248 - PCI IDs for a tor2 clone card

2006-05-30  Kevin P. Fleming <kpfleming@digium.com>

	* Zaptel 1.2.6 released
	
2006-05-23 17:51 +0000 [r1079-1081]  Kevin P. Fleming <kpfleming@digium.com>

	* build_tools/genmodconf: handle distros that ship pre-releases of
	  module-init-tools

	* Makefile, build_tools/genmodconf: make a backup even when
	  modifying non-combined rules files generate a warning about
	  editing non-combined rules files ensure that the warning is the
	  last output from the 'make install' process

2006-05-20 12:55 +0000 [r1076]  Kevin P. Fleming <kpfleming@digium.com>

	* pciradio.c: update module to work with kernels that don't include
	  2.4 module parameter compatibility macros (reported by tzafrir on
	  asterisk-dev)

2006-05-18 15:40 +0000 [r1073]  Joshua Colp <jcolp@digium.com>

	* fxotune.c: Clear dialtone before running tests (issue #7136
	  reported and fixed by trumpetinc)

2006-05-17 22:26 +0000 [r1071]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile: fix more buglets from my recent cleanups

2006-05-17 21:13 +0000 [r1068-1069]  Joshua Colp <jcolp@digium.com>

	* wctdm.c: Don't change the value of lasttxhook, instead do a
	  comparison. (issue #7175 reported and fixed by Thomas Andrews) If
	  this breaks things, you can yell at me.

2006-05-17 19:05 +0000 [r1064-1066]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile: revert some 'grep -q' changes that were wrong (oops)

	* Makefile, build_tools/genmodconf (added): move module-rules
	  building into a script, and remove some old unnecessary steps

	* Makefile, udev (removed), build_tools/genudevrules (added): move
	  udev rules creating into a script, and generate it properly based
	  on the installed udev version

2006-05-16 14:59 +0000 [r1060-1062]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile: silly... only root needs write permission

	* udev/zaptel.rules, Makefile, udev/zaptel.rules-combined: ensure
	  that PWD is set early enough for 'make install' to actually work
	  use proper KERNEL matching syntax for udev rules don't install
	  udev rules as mode 0444; there is no need to make them read-only

2006-05-09 11:46 +0000 [r1031-1033]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile: preserve 'options' settings in the module configuration
	  file during 'make install'

	* Makefile: use commmand-line parameter substitution for modprobe
	  commands if the system's module-init-tools is new enough to
	  support it don't backup and use the old configuration file for
	  modules if we are using a zaptel-specific file in /etc/modprobe.d
	  or similar

2006-04-30 16:24 +0000 [r1011-1017]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile: build xpp by default, now that the Makefile can
	  determine when an appropriate kernel version is being used for
	  the build

	* Makefile: restore building of XPP modules

	* Makefile: optimize variable settings use the kernel Makefile for
	  every step that it can be

	* Makefile: remove duplicate dependencies and unnecessary rules

	* Makefile, gendigits.c: allow the output of gendigits to be
	  redirected to a different directory from the current working
	  directory

2006-04-19 21:18 +0000 [r1004]  Kevin P. Fleming <kpfleming@digium.com>

	* wctdm24xxp.c: this product is no longer a prototype :-)

2006-04-03 07:08 +0000 [r995]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/card_fxs.c, xpp/xpp_usb.c, xpp/xpp_zap.c: by default don't
	  debug

2006-04-02 06:51 +0000 [r994]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_usb.c: fix build of xpp for kernel 2.6.14

2006-03-28 18:22 +0000 [r990]  Russell Bryant <russell@digium.com>

	* arith.h: suppress some warnings (issue #6814)

2006-03-06  Kevin P. Fleming <kpfleming@digium.com>

	* Zaptel 1.2.5 released
	
2006-03-04 21:50 +0000 [r974-976]  Mark Spencer <markster@digium.com>

	* wctdm24xxp.c: Increase default ring debounce slightly and use the
	  value properly.

	* wct4xxp.c: Fix NMI issues with some IBM xSeries servers

2006-03-03 20:14 +0000 [r973]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp, xpp/xpd.h, xpp/xpp_usb.c: small compilation issues

2006-03-03 19:11 +0000 [r970]  Russell Bryant <russell@digium.com>

	* xpp/README.Astribank (added), README.Astribank: move the main
	  Astribank readme into the xpp directory so they can manage it

2006-02-18 17:02 +0000 [r962]  Tilghman Lesher <tilghman@mail.jeffandtilghman.com>

	* Makefile: Make sure version.h gets built properly

2006-02-16 17:56 +0000 [r958]  Russell Bryant <russell@digium.com>

	* xpp/xpp_usb.c: fix build for linux 2.6.16 (issue #6505)

2006-02-15  Russell Bryant <russell@digium.com>

	* Zaptel 1.2.4 Released

2006-02-15 02:24 +0000 [r947-949]  Kevin P. Fleming <kpfleming@digium.com>

	* xpp/xpp_fxloader.usermap (added), Makefile, xpp/gen_slic_init
	  (added), xpp/xpp_zap.h (added), xpp/card_global.c (added),
	  xpp/card_fxs.c (added), xpp/slic.c (added), xpp/FPGA_XPD.hex
	  (added), xpp/xpp_proto.c (added), xpp/xproto.c (added),
	  xpp/cards.c (added), xpp/Makefile (added), xpp/card_global.h
	  (added), xpp/card_fxs.h (added), xpp/slic.h (added),
	  xpp/xpp_proto.h (added), xpp/zap_debug.c (added), xpp/xproto.h
	  (added), xpp/xpd.h (added), xpp/cards.h (added), xpp/sync.sh
	  (added), xpp/slic_init.inc (added), xpp/zap_debug.h (added),
	  xpp/xpp_fxloader (added), xpp/xpp_modprobe (added), xpp/xdefs.h
	  (added), xpp (added), xpp/xpp_usb.c (added), xpp/xpp_zap.c
	  (added), README.Astribank (added): initial import of Xorcom
	  Astribank driver (issue #6452, with minor mods)

	* wctdm.c: automatically set operational paramters for Australia
	  when that opermode is seleced (issue #6454)

2006-02-10 21:08 +0000 [r940]  Mark Spencer <markster@digium.com>

	* wctdm24xxp.c: More updates for Rev B VPM

2006-02-09 22:41 +0000 [r937]  Tilghman Lesher <tilghman@mail.jeffandtilghman.com>

	* zaptel.init: Bug 6451 - Default to probe and remove newest Digium
	  card

2006-02-01 02:33 +0000 [r930]  Russell Bryant <russell@digium.com>

	* ztcfg.c: fix a couple of typos in error messages

2006-01-31 06:38 +0000 [r927]  Mark Spencer <markster@digium.com>

	* wct4xxp.c, wctdm24xxp.c: Fix compile warning in tdm2400p and make
	  sure dmactrl is updated if vpm detected.

2006-01-31 Russell Bryant <russell@digium.com>

	* Zaptel 1.2.3 Released

2006-01-31 01:26 +0000 [r922]  Mark Spencer <markster@digium.com>

	* wctdm24xxp.c: Add support for VPM100M Rev B

2006-01-26 00:45 +0000 [r917]  Russell Bryant <russell@digium.com>

	* ztdummy.c: backport RTC support for x86_64

2006-01-19 04:40 +0000 [r907-911]  Russell Bryant <russell@digium.com>

	* wcusb.c: remove owner field for 2.6.16 (issue #6288)

	* ztdummy.c: fix symbol conflict with the kernel's rtc_interrupt
	  function (issue #6287)

	* ChangeLog (removed): remove extremely old ChangeLog ... they will
	  now only exist in tags

2006-01-18 Russell Bryant <russell@digium.com>

	* Zaptel 1.2.2 Released

2006-01-12 16:07 +0000 [r892]  Mark Spencer <markster@digium.com>

	* wct4xxp.c: Fix loopup / loopdown code detection

2006-01-10 20:32 +0000 [r885]  Matt Frederickson <creslin@digium.com>

	* Makefile, fxotune.c: Fix libtonezone naming scheme for minor
	  numbers

2005-12-28 22:10 +0000 [r879]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile, udev/zaptel.rules-combined (added): support newer udev
	  rules+permissions format install udev rules by default, since
	  it's so common on distros now

2005-12-22 22:51 +0000 [r874]  Kevin P. Fleming <kpfleming@digium.com>

	* wctdm24xxp.c: adjust input/output signals from FXO modules that
	  were too high

2005-12-17 02:04 +0000 [r865]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile, build_tools (added), build_tools/make_svn_branch_name,
	  /, zaptel.c, zaptel.h, build_tools/make_version_h: add version
	  and echo canceller selection reporting when zaptel module is
	  loaded make 'update' target work like the Asterisk one and report
	  conflicts

2005-12-16 00:16 +0000 [r859]  Kevin P. Fleming <kpfleming@digium.com>

	* wctdm24xxp.c: remove some debugging #if statements dont force
	  cardflag on for modules that are not present (so applications
	  can't try to open non-existent ports)

2005-12-13 19:08 +0000 [r855-857]  Kevin P. Fleming <kpfleming@digium.com>

	* wctdm.c: ensure data is output to proper io port address (issue
	  #5990)

	* Makefile: properly escape shell variable (from asterisk-users
	  mailing list post)

2005-12-04 19:29 +0000 [r848-850]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile: make Gentoo support actually work...

	* Makefile: add support for Gentoo modules.d directory

	* wctdm.c, wctdm24xxp.c: merge ringer changes from revs 845:847 in
	  trunk

2005-12-02 00:03 +0000 [r843]  Russell Bryant <russell@digium.com>

	* zaptel.c: fix udev support for 2.6.15 (issue #5891)

2005-12-01 23:14 +0000 [r841]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile: Makefile 'update' target now supports updating from
	  Subversion repositories (issue #5875)

2005-11-29 18:42 +0000 [r831-837]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp.c: merge rev 834 from trunk (2nd gen VPM400M support)
