
Intel(R) PRO/Wireless 2915ABG Network Connection driver for Linux
in support of:

Intel(R) PRO/Wireless 2200BG Network Connection
Intel(R) PRO/Wireless 2915ABG Network Connection

Note: The Intel(R) PRO/Wireless 2915ABG driver for Linux and Intel(R)
PRO/Wireless 2200BG driver for Linux is a unified driver that works on
both hardware adapters listed above. In this document the Intel(R)
PRO/Wireless 2915ABG driver for Linux will be used to refer to the
unified driver.

Copyright (C) 2004-2006, Intel Corporation

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS.
EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH
PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS
ANY EXPRESS OR IMPLIED WARRANTY RELATING TO SALE AND/OR USE OF INTEL
PRODUCTS, INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A
PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT,
COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.
This document is subject to change without notice.
* Other names and brands may be claimed as the property of others.


Known ISSUES

Version: 1.2.0
Date   : September 12, 2006

============================================

The following provides a list of known issues with the current Intel PRO/Wireless 
2915ABG Network Connection driver for Linux. If a defect # is provided, you can find
additional or updated information by visiting http://bughost.org and
entering the defect number as indicated.

For updates and additional information on these and other issues that 
may not have been found or not written in this document, please visit

http://bughost.org
	and
http://ipw2200.sourceforge.net

NOTE: Both adapters are covered at this site.


Incorrect RTS/CTS mechanism plus fragmentation behaviour
-----------------------------------------------------
When Intel PRO/Wireless 2915ABG Network Connection driver for Linux does
fragmentation, RTS is sent before the first fragment for most packages.
But sometimes RTS will be sent before each fragment.

Defect: #391


Problem with fragmentation and encryption in a noisy environment
------------------------------------------------------
Transmission problems are found randomly when using the driver with
fragmentation and encryption enabled together in a noisy environment.

Workaround: Disable fragmentation by "iwconfig eth1 frag off"


ICMP6 router advertisements can not get through randomly
------------------------------------------------------
ICMP6 packets can not get through Intel PRO/Wireless 2915ABG Network
Connection driver for Linux sometimes.

Workaround: Running this command "iwpriv eth1 sw_reset" can fix this problem

Defect #810


Wireless tool interaction
------------------------------
The following wireless tools operations are not yet supported by the
driver:

Currently there is no support for changing the sensitivity threshold
for the signal levels.
Defect:  #500

Currently the noise level is always -256dBm in IBSS mode.
Defect: #694


802.1x:
------------------------------
Supporting 802.1x is still lacking in  certain versions of xsupplicant, AP models.
Defect: #258


Firmware error in monitor mode
------------------------------
Sometimes there is firmware error in monitor mode: SYSASSERT 0x0000038f.

Workaround:
	Download ipw2200-fw-2.3 from http://ipw2200.sourceforge.net/firmware.php?fid=5.
	Unpack ipw2200-fw-2.3.gz in the directory that ipw2200-fw.2.4 is located.
	Delete all ipw2200-fw-2.4 files. Change the name of ipw2200-fw-2.3 files to 
		ipw2200-fw-2.4
	Reload Intel PRO/Wireless 2915ABG Network Connection driver for Linux.
Defect #832



